Prevent catastrophic damages and injuries from a failed roofing system. Knowing how long different roofing systems are supposed to last will help you get it evaluated and replaced when the time is right.

atlantacommercialroofingcontractors.com gathered the following information to help you determine when your damaged or aging roofing system needs to be replaced.

What Impacts How Long a Roof Lasts?

Each type of roofing system has a projected lifespan. What determines a roofing system’s longevity includes:

• Bi-annual inspections (spring and fall) under a maintenance program
• Early detection of hidden problems/defects in the roofing system
• Material quality
• Installation quality (workmanship)
• Weather patterns (severe weather events like hail, tornadoes, hurricanes, etc.)

A well-installed roofing system with continuous maintenance, care, and eventual repairs can last from 20 to 100 years, depending on the roofing material. Consider the following roofing systems:

Composition Shingles 15 – 40 Years

Composition shingles are a composite product made from a fiberglass or cellulose mat, asphalt, and mineral granules. Composition shingle roofing systems are also environmentally friendly. Most composite roof materials are made with a paper backing and produced using recycled materials.

This durable roofing system can last an average of 15 to 20 years with minimal maintenance and care. When properly installed and maintained, this roofing system can last up to 40 years.

Signs that a composition shingle roof replacement may be necessary include:

• Visible signs of roof or shingle aging
• Multiple leaks
• Missing mineral granules
• Shingle curling (most common along edges)
• Missing shingles
• Moss growth on shingles
• Algae growth (dark stains running down the roof slope)

Severe weather events are common factors in roofing system damages and failures. After such events, your roofing system should be inspected and repaired if possible.

Note 1: A typically hidden problem with shingle roofing systems is bad shingle adhesion. Contributing factors often include manufacturing inconsistencies, poor installation practices, advanced aging and shingle deterioration, cold weather installations, lack of attic ventilation, and repeated thermal expansion and contraction.

Note 2: Another, often hidden, issue occurs when gaps or openings are left in a roofing system's eaves, soffit, or fascia. These openings allow small animals/wildlife to enter attic space, destroying insulation or compromising a roofing system's integrity from the inside out.

Asphalt Shingles 10 – 20 Years

Asphalt shingles are not made solely of asphalt. They consist of either a fiberglass or felt paper base coated with a waterproof layer of asphalt and topped with mineral or ceramic granules. Over the past four decades, fiberglass-based shingles have been the more requested product.

This roofing system can last an average of 10 to 15 years with minimal maintenance and care. When properly installed and maintained, this roofing system can last up to 20 years.

Similar to composition shingles, signs that an asphalt shingle roof replacement may be necessary include:

• Visible signs of roof or shingle aging
• Multiple leaks
• Missing mineral granules
• Shingle curling (most common along edges)
• Missing shingles
• Moss growth on shingles
• Algae growth (dark stains running down the roof slope)

Note: Shingle roofing systems often hide water damage from failed flashing in valleys, around chimneys, and in poorly constructed chimney crickets or saddles. This type of failure can lead to multiple leaks, deck rotting, and eventual roof failure.

Severe weather events are common factors in roofing system damages and failures. Again, after such events, your shingle roofing system should be inspected and repaired if possible.

Wood Shingles Up to 30 Years

Wood shake roofing and a wood shingle system are both typically made from cedar, cypress, redwood, or pine. While these wood products have similarities, they're produced differently. Wood shingles are usually machine cut on both sides, and wood shake material is created by splitting rectangles from a log.

Being rot and insect resistant, a wood shingle roofing system can last up to 30 years with diligent annual upkeep.

Signs that wood shingle or wood shake roof replacement may be necessary include:

• Visible signs of aging or damage in multiple areas of the roof
• Multiple leaks
• Cracking, splitting, or warping shingles
• Missing shingles

Often, these signs will be confined to a section of the roof, which may mean only a repair is needed.

Note: A commonly hidden problem with wood shingle roofing systems is a poorly ventilated attic. Moisture that cannot escape the attic is forced upward through the roof structure causing shingles to curl and buckle. This uneven warping traps water, exacerbating the roof's deformation and rapid decay of its framework.

Single-ply Membrane (TPO & PVC 15-30 Years, EPDM 30-50 Years)

Single-ply membrane roofing systems require fewer seams than asphalt roofing systems and don't require torches or hot asphalt for installation. Single-ply systems come with prefabricated finishing accessories that make installation easy. Consider the following:

TPO – TPO (thermoplastic polyolefin) is a single-ply membrane and is one of the fastest-growing commercial and residential roofing systems. TPO roofing systems are made of a single layer of synthetics and a reinforcing scrim used to cover flat roof substrates.

Because TPO is relatively new in the roofing industry, its full lifespan has yet to be determined. This roofing system can last an average of 15 to 20 years with minimal maintenance and care. When properly installed and maintained, this roofing system can last up to 30 years before replacement.

To learn the benefits, cost, and problems related to a TPO roofing system, read the TPO Roofing System Explained article.

Signs that a TPO roof replacement may be necessary include:

• Visible signs of aging or damage in multiple areas of the roof
• Multiple leaks
• Chronic ponding
• Severe alligatoring (shrinkage and cracking)

Note 1: Often overlooked and elusive are damages caused by a parapet wall's failed metal coping. This roofing system malfunction allows water to collect between the TPO membrane and roof substrate, ultimately resulting in leaks, membrane deterioration, and structural damages to the building.

Note 2: Another hidden problem for flat or low-sloped roofing systems occurs when internal drainage (drainage routed through the structure) becomes clogged. A blocked drainage system can lead to ponding and severe water damage requiring costly structural repairs and roofing system replacement.

Detected early, these issues can be halted with repairs. When the roofing system becomes compromised in multiple locations, replacement may be the only option.

PVC – PVC (polyvinyl chloride) roofing is a single-ply roofing system used on commercial, industrial, and residential flat or low-sloped roofs. PVC is among the world’s most widely produced synthetic plastic polymer.

Like TPO, this roofing system can last an average of 15 to 20 years with minimal maintenance and attention. When properly installed and maintained, a PVC roofing system can last up to 30 years before replacement.

Like TPO, signs that a PVC roof replacement may be necessary include:

• Visible signs of aging or damage in multiple areas of the roof
• Long tears or rips
• Multiple leaks
• Chronic ponding
• Severe alligatoring (shrinkage and cracking)

Note 1: Improperly welded or damaged seams can allow water infiltration, often remaining undetected until extensive damages have occurred to the roofing membrane and substrate, requiring the roofing system's replacement.

Note 2: Foot traffic to and from electrical equipment and other rooftop installations can result in membrane tears and roofing system damage that can also go undetected until such damages require extensive repairs or roofing system replacement. This type of damage can be prevented by installing reinforced walkways or paths wherever foot traffic may be required.

Detected early, these issues can be halted with repairs.

PVC is somewhat similar when compared to TPO, but there are some unique advantages and we suggest knowing The Difference Between PVC and TPO Roofing Systems.

EPDM – EPDM (ethylene propylene diene polymethylene) is a durable synthetic rubber roofing membrane produced using two primary ingredients, ethylene and propylene, derived from oil and natural gas.

Utilized worldwide in the roofing industry, EPDM membranes exhibit a high level of stability as they age. This roofing system can last an average of 30 years with minimal maintenance and care. However, when properly installed and maintained, an EPDM roofing system can last up to 50 years before requiring replacement.

Signs that an EPDM roof replacement may be necessary include:

• Visible signs of aging or damage in multiple areas of the roof
• Long tears or rips
• Multiple leaks
• Chronic ponding
• Severe alligatoring (shrinkage and cracking)
• Use of improper repair materials, including asphalt and roofing cements

Note: One of the more elusive complications for this and all other flat roofing systems is an incorrect slope (these roofing systems are often referred to as low-slope roofing systems). If the slope is too low, ponding can occur with heavy precipitation or even the slightest drainage obstruction. Ponding or water pooling leads to rapid deterioration of all roofing system components and will likely result in the need for a complete roofing system replacement.

To learn more of the benefits, installation process, cost, warranty, and problems with an EPDM roofing system, read EPDM Roofing System Explained.

Built-up Roofing (BUR) 30+ Years

Built-up roofing systems consist of multiple layers of asphalt alternated with felt sheets applied over the roof deck (substrate), vapor retarder, and insulation that is attached to the roof decking. The system is then covered with a reflective membrane (cap sheet) or coating system.

Depending on the climate and materials used, a built-up roofing system has an average lifespan of 20 years. Well-installed and maintained BUR systems have been known to last 30+ years.

Signs that a BUR roof replacement may be necessary include:

• Multiple leaks (especially after having been repaired)
• Chronic ponding
• Severe weather or impact damage

Note: Leaks occurring in a built-up roofing system are often elusive, remaining hidden until severe damage has occurred to the roofing system and building structure. When a layered roofing system such as this develops multiple leaks, the likely course of action is to replace the system entirely.

To learn more of the installation process, benefits, cost, warranty, and potential problems with a Built-up roofing system, read the Built-up Roofing System (BUR) Explained article.

Modified Bitumen (ModBit) 15 – 25 Years

Modified Bitumen (ModBit) roofing is an asphalt-based roofing system similar to Built-up-Roof (BUR) and is designed for structures with low-slope or flat roof structures. Its five layers of protection make this roofing system one of the most trusted in the industry today.

Location, maintenance, and roof design are influencing factors on this system’s longevity. This roofing system can last an average of 15 years with minimal maintenance and care. When properly installed and maintained, a ModBit system can last up to 25 years before needing replacement.

Very similar to BUR, signs that a ModBit roof replacement may be necessary include:

• Multiple leaks
• Chronic ponding
• Severe weather or impact damage

Note 1:When this or other flat roofing systems are ballasted with gravel or stone, repairs will often require the removal of that gravel or stone. This process may ultimately require the partial or complete replacement of the roofing system.

Note 2: A common and barely noticeable problem with ModBit roofing systems involves vibrations from mechanical equipment causing mechanical fasteners to loosen and back out, leaving holes in the membrane. As this condition progresses, severe water damage including rusted components, substrate or decking deterioration, leaks, and costly structural damages occur and can remain virtually unnoticed until a partial or total failure of the roofing system.

Note 3: Roof coatings are commonly applied to aging roofing systems to extend their lifespan. In doing so, a roof coating may fail, allowing slow leaks to develop and remain undetected until severe structural damages occur. These damages become evident as interior leaks, sagging areas in the roof, severe ponding, and roofing system failure if left to develop.

To learn more about the modified bitumen product, benefits, warranty, cost, and potential problems with this roofing system, see this Modified Bitumen Roofing System Explained article.

Metal Roofing Up to 70 Years

Metal or tin roofing is a popular roofing system around the United States and in Canada. The term “tin” is used interchangeably with metal, steel, or galvanized steel roofing. However, tin is an incredibly rare element and unused for roofing.

This incredibly durable roofing system can last an average of 25 to 40 years with minimal maintenance and care. When properly installed and maintained, a metal roofing system can last up to 70 years before requiring replacement.

Signs that a metal roof replacement may be necessary include:

• Multiple leaks
• Rusting components
• Multiple damaged panels
• extensive weather or impact damage

Note: Due to the expansion and contraction of metal roofing, fastening and anchoring systems can weaken and fail over time. This problem can result in complete roofing system failure and is often only detected during routine maintenance visits.

To learn whether this type of roof suits your needs, read Metal Roofing Advantages and Disadvantages.

Clay Tiles 50 – 75 Years

In use since the 17th century, clay tiles are made by baking molded clay. Tile density is determined by heating time and at what temperature. Known for their ability to withstand high winds, hail, and fire, these tiles are produced in white, yellow, orange, and brown shades.

A clay tile roofing system can last an average of 50 years. With proper installation and maintenance, a clay tile roofing system can reach 75 years before replacement is needed. In rare cases clay tile roofing can even reach a whopping 100 years.

Signs that a clay tile roof replacement may be necessary include:

• Multiple cracked, damaged, or missing tiles
• Roofing system sagging
• Severe weather or impact damage

Note: While clay tile roofing systems can be long-lived, flashing failures (corrosion or cracking), and fastener failures (rusting) often result in water damage to the roof's decking and multiple leaks in the structure below. This type of damage can remain dangerously elusive, only appearing during a maintenance inspection or when the roofing system partially or completely fails.

When damages are minimal or confined to a small area, clay tile roofing systems can be easily repaired. More extensive damages will likely require partial or full replacement.

Roofing Maintenance Program

Roof maintenance plans are provided by commercial and residential roofing contractors, in which they agree to perform scheduled inspections, cleaning, debris removal, and scheduled or recommended preventative roof maintenance.

Acquiring a roofing maintenance program from a licensed roofing contractor allows property owners to protect the roof’s warranty provisions, extend the roof’s lifespan, and ultimately save money by preventing significant damages and costly repairs.

Most roof warranties require a minimum of one roof inspection per year performed by an authorized contractor. These inspections allow early detection of problems and their timely repair before developing into catastrophic problems, leading to a roof’s replacement.

Commercial Roofing Maintenance Programs and Services can greatly extend the life expectancy of your roofing system. If you are beyond repair and in need of a new roof, consider starting a maintenance plan after its replacement; a preventative service will add years to the life of your roof, and considerable savings to your investment.

Commercial And Residential Roof Replacement

In this article, you discovered information about roofing system longevity to help you determine when your roof should be repaired or replaced.

When you know your roof’s projected lifespan, the durability of its materials, and have diligently provided for its care and maintenance, it is likely that your roof will far outlive its life expectancy.

Ignoring your roof and its maintenance needs will sharply abbreviate its lifespan, potentially leaving you with costly repair bills, significant leak damage, and in need of an emergency replacement when it suddenly fails.

Sources:
epdmroofs.org/what-is-epdm/
asphaltroofing.org/bur-multi-ply-built-up-roofing/
energy.gov/energysaver/design/energy-efficient-home-design/cool-roofs

See When Does a Roof Need To Be Replaced? for the first version of this content.

Is TPO the best flat roof system for your property? This question is frequently asked by property owners that need a new roof, and we have the answer.

As a relative newcomer to the roofing materials industry, TPO roofing systems have gained extraordinary popularity and are being used throughout the United States. Due to its durability and cost efficiency, TPO should be considered when re-roofing or installing a new roofing system.

atlantacommercialroofingcontractors.com takes an in-depth look at the definition, installation, warranty, cost, and problems associated with TPO roofing systems while answering some of the most frequently asked questions about it.

TPO Roofing Explained – Production, Properties, and Benefits

TPO is Thermoplastic Polyolefin, and it is one of several single-ply roofing systems.

The following will help you understand the composition, properties, and production of TPO membranes for both commercial and residential structures.

• A TPO membrane may be produced by calendering with lamination (this is the process of combining materials at high heat and pressure by passing them through rollers), extrusion with lamination (a process to make long shapes with constant cross sections, similar to squeezing toothpaste from a tube), or through extrusion-coating techniques.
• Sheet thickness is usually 40 mils to 100 mils. That’s about the thickness of a heavy duty trash bag.
• Sheets are typically produced in widths ranging from 6 feet to 12 feet.
• The composition of TPO sheets is a blend of polypropylene, ethylene propylene polymers, and polyester reinforcement.
• Overlapping seams are sealed by heat welding which uses hot air.
• The majority of TPO membranes are white but can come in a variety of colors.
• TPO roofing is resistant to oils and chemicals carried by commercial exhaust vents.
• TPO roofing material contains flame retardants and UV absorbing elements.
• TPO roofing systems receive high wind ratings when properly installed.
• TPO roofing has a life expectancy of about 30 years, however, only having been in use for three decades, its full potential lifespan is still being evaluated. As time passes, production of the system and its method of installation have naturally worked out the bugs, thus improving the product and increasing its longevity.

TPO Roofing Installation and Warranty

The installation of a TPO roofing system, when done by an experienced roofing company, is fast, clean, and virtually nonintrusive.

How your roofing system is installed will determine its ability to withstand the elements and ultimately its lifespan.

Affixing the TPO membrane is accomplished by making it fully adhered, and mechanically attached or ballasted; the following factors greatly influence the quality of the roofing system’s installation:

• Proper roof slope for a efficient draining.
• Strategic installation and fastening of insulation (when used) to deter bulging or sagging.
• Proper application of adhesives.
• Proper use of a seam welder (to prevent future leaks in the seams).
• All welds checked using a seam probe.
• Drip edge seamlessly connected around the perimeter of the roof.

In addition to a quality installation, a strong warranty is advantageous and very valuable. There are two warranties to consider when installing any new roofing system:

Manufacturer’s Warranty – This warranty covers manufacturing defects in the material used for your roofing system. Once the installation is complete, your contractor should provide you with a warranty certificate.

An example of material failure would be the separation of the lamination from the TPO membrane during hot weather. Unless it is determined to be a result of faulty installation, a claim should be made against the manufacturer’s warranty.

Contractor’s Warranty – This warranty covers the workmanship and installation of your roofing system.

While there is no industry standard for the duration of a contractor’s warranty, it should contain the following:

• A list of what items are covered.
• What actions or situations would void the warranty.
• When the warranty expires.

The above installation and warranty information underscore the necessity to thoroughly vet contractors.

TPO Roofing Cost

Pricing any roofing system can be a daunting experience. Often there is a significant disparity from one quote to the next, validating the need to collect a minimum of three bids from reputable roofing contractors.

Prices for installing a TPO roof system will vary depending on the time of year, brand, quality of the materials, method of installation, and the amount of labor involved. You can expect to see price quotes in the following ranges:

Tear-off costs can run between $100 and $200 per square. In some cases, the contractor will bundle this into material and installation pricing.

A tear-off is when the existing roofing system is completely removed to install a new system. Depending on the type of roofing system being installed and the condition of the existing roof, the new system may be installed over the existing one.

TPO material will see a price range between $150 and $500 per square.

TPO installation labor costs will range from $500 and $900 per square.

Maintenance contract pricing varies from contractor to contractor.

Roofers and their suppliers price materials in terms of ‘squares,’ whereas
1 square = 100 square feet.

So as an example, the price range of the bids you receive, including tear-off, material, and installation for a 1,000 square foot roof may fall within $7,500 to $16,000.

Note: Across the industry, roofing installations are more expensive in the spring and summer time. To save money, try to schedule an installation for the off-peak season (early spring and fall).

TPO Roofing Problems

The majority of problems that arise with TPO roofing systems occur as a result of poor installation.

Here are some commonly reported issues:

• Roof slope is too low, resulting in pooling water. (which degrades materials faster)
• Insulation (under the membrane) not installed correctly and is causing bulges.
• Seam separation from improper welding, allowing water penetration.
• Torn membrane from debris striking the roof.

For proper installation, it is essential to hire a roofing company that has extensive training and experience with TPO roofing systems.

People Also Ask

Question: Is TPO better than EPDM?
Answer: Inconclusive. Depending on which aspect of the two roofing systems you wish to compare, and your roofing requirements, the answer may vary.

While EPDM and TPO offer very similar benefits, TPO with its stronger and more durable seams (adhered to the roof), make it a desirable option.

Question: What is the difference between PVC and TPO?
Answer: Visually, the two roofing systems are virtually identical.

Performance-based, the two systems produce similar results until puncture resistance, environmental impact, and eventual “known” problems are taken into account. In this scenario, the TPO system is a superior option. However, when price and warranty terms are considered, PVC edges out TPO. Both are great products that check different boxes and satisfy different needs.

Question: How long has TPO roofing been around?
Answer: Since 1989.

Question: What colors does TPO roofing come in?
Answer: Standard colors are white, tan, and grey. However, TPO can be found in different shades of grey, brown, green, red, tan, and gold.

Question: Is TPO roofing flammable?
Answer: Yes. However, as with all roofing systems, TPO roofing is required to meet FM and UL fire ratings.

A distinct difference and advantage of TPO is that it does not release dioxins when burned and contains flame retardants.

TPO Information Revealed

When being presented options and quotes for new roofing systems, property owners frequently ask “What is TPO?” As you’ve discovered, it’s one of the most popular thermoplastic roof membranes in today’s roofing industry.

In this article, you were presented valuable information about the installation, warranty, cost, life expectancy, problems associated with TPO roofing systems, and answers to frequently asked questions.

By asking the right questions and being informed when selecting a roofing system and the contractor to install it, you will benefit from getting the best roofing solution and warranty at the best available price.

Sources:
http://www.everybodyneedsaroof.com/thermoplastic-membranes
http://mrca.org/aws/MRCA/asset_manager/get_file/161617?ver=344
http://firestonebp.ca/roofing/tpo-roofing-systems/tpo-installation-methods/
http://www.nrca.net/
http://www.azsfb.gov/sfb/Performance%20Specifications/Roofing%2009202018/07%2054%2023%20-%20TPO.pdf

See TPO Roofing System Explained for the first version of this content.

Do you know the blatant and hidden roofing job signs most likely leading to expensive repairs and/or roof failure? Most roofers won’t tell you about these common mistakes, but we will.

For the investment that a new roof requires, you would like to be able to expect a complete and mistake free installation. Avoid the expensive surprises and premature roof failure by knowing what to look for and can go wrong.

atlantacommercialroofingcontractors.com gathered a list of the 15 more common mistakes roofers make during the installation process.

Mismatched Roofing Shingles

One of the more visible mistakes a roofer can make is to use mismatched shingles. This obvious mistake occurs when a roofing contractor uses multiple dealers and purchases supplies from more than one supplier.

This can be avoided by selecting a roofing contractor that consistently uses the same roofing supplies distributor.

Layers of Shingles

Depending on the municipality your property is located in, it may or may not be unlawful to install a new roofing system without first tearing off the old one.

By tearing off the old roofing system, your contractor can fully inspect your roof deck for any weaknesses, gaps, and other potential issues. An added benefit is that your roof deck will not have to support the weight of two systems.

On the contrary, some commercial roofing systems are engineered to overlay an existing roofing system. Before this happens, the number of layers is checked and decking is tested for it soundness.

This cost-savings method prevents a complete tear-off and related debris hauling process, but should only be used on a commercial roofing system and in accordance with all local and state laws.

Incorrect Use of Roofing Nails

Roofing systems that utilize nails to secure it to the roof deck have specific guidelines for the size and use of nails. The following are common mistakes that could lead to your insurance company refusing to pay a claim in the event of roof failure.

• Nails without barbed shanks.
• Nails are too short.
• Nail Heads are too small.
• Not enough nails used. (the average is four per shingle and six for higher slopes or premium installations)
• Nails driven above the self-sealing strip.
• Nails driven into knotholes or gaps in the roof deck.

All of the above can result in the acceleration of a roof’s deterioration.

Incorrect Shingle Overhang at the Eves

Shingle overhang at the eaves should be between 6 and 10mm. More than this can result in the shingles being blown off during high winds or severe storms. Less than 6mm can result in water infiltration of the roof deck and leaks within the structure.

This mistake can be avoided by proper shingle installation and with the addition of a drip edge flashing to protect the edges of the deck from water infiltration. This flashing can be secured with a shingle adhesive.

Neglecting the Installation or Reusing the Drip Edge Flashing

Drip edge flashings help ensure a roof’s success at keeping the outside elements outside. Here are some of the benefits:

• Stops wind-driven rain from gaining access at the edge of the roof.
• Provides a surface for water to drip from which prevents saturation and decay of the deck or fascia board
• Drip edge flashings stop insects from entering the attic.
• Since they extend slightly past the edge of the roof, they support and keep shingles from sagging or breaking.

When replacing your roofing system, ensure that all drip edge flashings are replaced. This expense is minimal considering the cost of a new roof, and serves to protect your investment.

Improper or Missing Starter Shingles (Starter Strips)

Both rookie contractors and do-it-yourselfers frequently make this mistake. A starter section of shingles should be laid along the eves.

Without starter shingles, water will make its way to the roof deck through the cutouts of the bottom shingles.

Improper Installation of Underlayment

Roofing underlayment is a layer of water-resistant or waterproofed material that is installed directly onto your roof deck. The underlayment is applied under all other roofing materials as an added layer of protection from severe weather and the elements.

There are three principal types of roofing underlayment:

• Asphalt-saturated felt
• Non-bitumen synthetic underlayment, or synthetic underlayment.
• Rubberized asphalt underlayment

Asphalt-saturated felt, and synthetic underlayment are both water-resistant, while rubberized asphalt underlayment is waterproof.

Neglecting the Attic

Your roof is a system made up of various parts, including the attic space. Without proper attic ventilation, moisture can build up over time causing your roofing system to prematurely wear out, and ruining your insulation, resulting in sharp increases in your energy bill.

Improper Roof Slope

The use of materials that don’t suit the slope of your roof will leave your structure susceptible to water penetration.

As an example: For an installation of asphalt, wood, or tile shingle roofing systems, it is recommended to have 4 units rise per 12 units of run.

Roof Gutter Sag

Roof gutters are vital to guiding water away from your roof. When they sag, come loose, are installed too low, or do not sufficiently slope, they can back up or overflow, allowing water to enter the structure.

Insufficient Securing of Roof Valley Flashing

Since roof valleys typically handle large volumes of water runoff, they are more prone to leaks. When roof valley flashings are improperly installed, the roofing system can buckle, leading to water leaks and costly repairs.

In addition to the proper installation of roof valley flashing, using the appropriate amount of sealant and adhesive material will work to prevent water penetration.

Not Planning for Ice Dams

In colder climates, ice dams form at the roofline which forces water under the shingles. Thawing and refreezing can wreak havoc on a roofing system without proper insulation.

Damage can be significantly reduced or prevented by applying an additional underlayment from the roofline to about three to four feet up the roof. This provides an extra layer of protection from melting ice water.

Ignoring the Manufacturer’s Guidelines

Roofing manufacturers have detailed regulations on how their roofing systems must be installed. Deviations from these regulations may determine whether a manufacturer will honor their warranty in the event of the roof’s failure before the guaranteed lifespan.

Skipping the Roofing Permit

Most municipalities require a permit for new roof installation. The building owner or property owner is ultimately the one held liable for failing to obtain a permit.

Having a roof installed without a permit may result in fines, refusal of insurance coverage, or even the forced complete removal of the new roof.

Insufficient Roofing Contractor Insurance

If your contractor does not carry enough insurance to pay for damages or injuries, you may be held responsible for covering these costs.

All reputable roofing contractors will willingly provide proof of their insurance policy. Likewise, their insurance company may be contacted to confirm their coverages.

Avoid a Bad Roofing Job

Knowing the signs of a lousy roofing job and contractor will help you avoid expensive surprises and premature roof failure.

In this article, you discovered 15 of the most common roofing mistakes that can lead to leaks, weather damages, and roof failure.

If you don’t know what to watch for during the installation of your new roof, you are leaving too many windows for mistakes that can cause serious damages to your property and potentially result in the failure or loss of your new roof.

Sources:
https://www.fema.gov/media-library-data/20130726-1706-25045-9347/chapter8.pdf
https://dopl.utah.gov/licensing/contracting_avoid_costly_mistakes.html
http://www.ashireporter.org/homeinspection/articles/don-t-miss-the-shingle-stagger-/1973
https://www.handymantips.org/major-roofing-mistakes/

See 15 Common Mistakes Most Roofers Won’t Tell You About for the first version of this content.

Over 9 billion dollars worth of damage was done in the California wildfires in 2018 alone. In the previous year’s fires, 8,000 homes, more than 200 commercial buildings, and 40 irreplaceable souls were lost.

Wildfires are becoming more commonplace and destructive, and all measures you can take to protect your property should be known.

As environmental conditions deteriorate, atlantacommercialroofingcontractors.com advocates learning the causes, facts, and ways to protect your property against wildfire.

Wildfire Information

When a fire ignites in a forest or in the fields, little time is needed for it to gain momentum and grow to monstrous proportions. Weather, winds, and combustible vegetation all contribute to the movement and ferocity of a wildfire.

The following information will shed some light on wildfires:

Wildfire Definition – An uncontrolled fire occurring and spreading in wildland areas, which can reach and destroy residential, community, and commercial property.

These fires may also be referred to as forest fires, brush fires, wildland fires, grass fires, or vegetation fires.

What Causes Wildfires? – Of all the potential causes of wildfires, human carelessness is the most frequent cause.

While lightning strikes, heat from the sun, and power line arcs are potential causes, the following activities are the most frequent reasons for wildfires:

• Arson (the intentional ignition of a fire)
• Discarded Lit Cigarettes
• Camp Fires Improperly Extinguished
• Improper Burning of Debris
• Controlled Fires that Escape Control
• Playing with Matches
• Lighting Fireworks

Wildfire Facts – The following information highlights essential facts about how wildfires benefit nature, how they spread and the damage they are capable of causing:

• Fuel for wildfires include all vegetation (grass, shrubs, plants, and trees).
• Wind plays a crucial role in the growth, direction, and speed of a wildfire.
• Embers can travel and ignite new fires up to a mile from the fire they originated from.
• Wildfires (under optimal conditions) are able to achieve speeds of up to 20mph.
• Wildfires can consume homes, commercial buildings, and any structure with combustible material.
• In 2018 alone, more than eight and a half million acres were burned by wildfires in the United States.

Watch this video to learn more about what fuels a wildfire.

Protect Your Property from Wildfires

While you cannot control the direction, speed, and size of a wildfire, there are measures you can take to harden your property and minimize potential damages.

The Roof – The most vulnerable element of any structure is the roof and regardless of anything else you do, a flammable roof will mean the difference between your property or building not surviving and surviving a wildfire.

As embers can travel vast distances, they may land on your roof and ignite a blaze that quickly engulfs and destroys the structure. If your roof is made from flammable material or is in need of repairs, consider re-roofing the property

A roof constructed from non-flammable material with a high UL fire-resistance and smoke protection rating such as composition, asphalt shingles, metal, tile, or slate offer the best possible protection from embers igniting a fire on your roof.

Have your roof inspected by a professional to verify that there are no gaps, damaged material, or spaces between the decking and covering. The goal is to eliminate anything that could catch embers or burning objects.

Exterior Vents – Embers can get in through vent openings. Use a non-flammable eighth-inch metal mesh to cover them. For vents in eaves and cornices, baffles should be used as mesh covering will not provide enough protection.

The Gutters – leaves, pine needles, and debris that collect in gutters can cause severe damages to your property in a few ways:

During heavy rainfall, water can accumulate in your gutters and potentially cause structural damage and leaks in your roof.

During an approaching wildfire, embers may find their way to the gutters and ignite the debris creating a dangerous scenario.

This problem can be curbed by installing aluminum gutters with leaf guards or gutter guards. Even with these precautions, your gutters should be inspected and cleaned on a frequent basis.

The Walls – Combustible siding materials will defeat the purpose of installing a non-flammable roof. Fireproof your home or building by using non-flammable materials such as stucco, aluminum wall siding, fiber cement, or other material with a UL fire-resistance rating in accordance with building codes for your municipality.

For siding material such as these to achieve maximum efficiency, they must extend from the foundation to the roof and make a seamless connection to doors and windows.

The Windows – As the radiant heat from a wildfire approaches, cracking glass windows and melting plastic skylights can become a significant liability by allowing entry to embers and igniting anything flammable.

Installing dual-pane windows (with one or both panes of tempered glass) will provide better resistance to increasing temperatures.

Make sure that window and door frame assemblies are fire-resistant as well.

Fireproofing The Perimeter – Anything organic can be considered fuel for a wildfire. Ideally, there should be a perimeter extending at least 5 feet from the structure in which combustibles have been reduced or eliminated.

The following will help you identify potential hazards:

• Wooden gates or fences should be attached to a metal or masonry barrier. If attached to the structure, they could carry the fire to it.
• Firewood stacks and propane tanks should be kept a minimum of 30 feet from the structure.
• Replace organic mulch with gravel or stone mulch within the perimeter.
• Trees and shrubs should be well-watered, seasonally pruned, and inspected annually for signs of drought, disease, or infestation.
• Grass must be kept healthy, well-watered, and cut. In areas prone to wildfires, alternative non-organic landscaping is recommended.

Resources for Immediate Wildfire Assistance

• If you are trapped in your home or business during a wildfire, call 9-1-1 for assistance and rescue
• Call the American Red Cross at (800) 733-2767 or to find a location near you, visit redcross.org/find-your-local-chapter.html
• For federal disaster financial assistance, visit usa.gov/disaster-financial-help
• Disaster assistance may also be applied for at disasterassistance.gov/get-assistance/find-assistance

Reduce the Effects of a Fire Disaster

The massive amount of damage that wildfires have caused out west and throughout the United States is staggering. Countless businesses, homes, forests, and lives have been lost.

In this article, you discovered the definition, potential causes, and facts about wildfires, as well as measures to take to protect your home or business from becoming a wildfire statistic.

Wildfires are becoming more frequent, larger, and more deadly. If your property is situated in an area that is prone or has the potential for wildfires, your inaction to protect your assets could very well cost you everything.

Sources:
https://fas.org/sgp/crs/misc/IF10244.pdf
https://www.ready.gov/wildfires
https://disastersafety.org/wp-content/uploads/2017/03/WF_California_IBHS.pdf

See Information to Protect Your Property from Wildfire for the first version of this content.

After a severe weather event, leaks in a commercial roof can become problematic very quickly. Besides disrupting business and making a mess, they can cause electrical problems, structural damage, and lead to roof failure if not promptly addressed.

When the roof of your commercial building, hotel, office, warehouse, or retail location is damaged or develops a leak, it should be treated as an emergency and handled immediately.

In this article, atlantacommercialroofingcontractors.com discusses weather-related roof damage, insurance company assessments, and how to hire a roofing contractor.

Causes of Commercial Roof Damage and Leaks

During or after a severe weather event, damages to your roofing system may become very obvious in the form of saturated walls, drips, or even streams of water cascading to the floor.

Hailstorms, hurricanes, and tornadoes in particular can beat up your roofing system, causing severe structural damages, such that extensive repairs or even roof replacement may be necessary.

However, sometimes a severe weather event isn’t necessary to expose an emergency situation. Over time, your roof must frequently endure extreme temperature fluctuations, and eventually, all it takes is a rain shower on a mid-summer afternoon to rapidly cool a nearly 200-degree roof and presto! You’ve got leaks and an emergency on your hands.

Roof Assessments and Insurance Inspections

If your roof damage emergency is the result of an act of God, before any major work begins, you must file the insurance claim. To do so, gather your policy number(s), facts about the situation, and call your insurance carrier to request an assessment.

During an evaluation inspection, the adjuster must determine the following when assessing the total of your loss:

• What is the extent of the damage?
• How much material is needed for repairs?
or
• Was the roof damaged sufficiently to declare it a total loss?
• How much material is required for replacement?

To ensure that you will receive the maximum benefit from your insurance policy, call a professional roofing contractor to have your own independent assessment done.

Request a Reinspection – If you find discrepancies between the insurance adjuster’s findings and those of the roofing contractor, you have the right to request a reinspection or contract an insurance public adjuster.

Reinspections are common practice, in which the insurance adjuster will meet with the roofing contractor to review the damages done to your roof.

Upon approval of the claim to repair or replace your roof, your insurance provider may select the roofing contractor to complete the work. They may also leave that determination up to you.

Note: In areas where a disaster has occurred, insurance companies may set up and follow special temporary procedures to expedite repairs and rebuilding. In these scenarios, it is important to keep receipts and records for temporary repairs, as the insurance company will likely reimburse you.

Hiring A Roofing Contractor – What to Look For

Natural disasters and severe weather events tend to attract some of the worst characters in the roofing business that prey on unsuspecting property owners who are under pressure to get things back to normal.

Replacing the roof of a building is a significant investment that needs to be done right, by a contractor that can be fully vetted and held accountable for the quality of their work. When fielding bids from contractors to repair or replace your roof, consider the following factors into the decision-making process.

Does the contractor have:

• A written proposal?
• A valid business license?
• Proof of insurance
• A permanent business location?
• In-depth knowledge and understanding of your roofing system?
• Up-to-date industry education?
• Financial stability?
• Material and installation warranties?
• A maintenance proposal?
• An effective safety training program?
• In-state references?

Also look for:

• Manufacturer certifications.
• Proof of continuous training.
• Roofing association memberships.
• Industry awards and recognition.
• Good and bad press or reviews.

Be wary of contractors which:

• Provide a seemingly unrealistic high or low bid.
• Only provides out-of-state references.
• Request money before any on-site material delivery.
• Only deal in cash.
• Cannot verify their company information and statements.

A fast way to address all of the above is to request a “Roofing Contractor Qualification Statement.” This document collects in-depth company information, references, history, and financial stability neatly organized to facilitate your evaluation of that company.

Managing Your Commercial Roof Seamlessly

The weather and harsh conditions a commercial roofing system must endure dramatically influences its lifespan and necessity for repairs. When the need arises, and it eventually may, you should be prepared to quickly file a claim and call in a professional roofing contractor.

With the above information, you can now identify an emergency roofing situation, effectively work with your insurance company, and thoroughly vet the contractors bidding for your job.

Without your prompt action, your commercial building will suffer significant losses or temporary closure when severe weather leaves your roofing system vulnerable, damaged, destroyed, and leaking.

Sources:
https://www.fema.gov/
http://www.nrca.net/
https://disastersafety.org/ibhs/hiring-a-professional-commercial-contractor/
http://www.everybodyneedsaroof.com/Roofing-Information-For-Building-Owners

See Commercial Roof Repair, Insurance Claims, and Hiring Contractors for the first version of this content.